Publications (214) Publications de Ricardo Manuel Souto Suárez

2024

  1. In-situ measurement of electrochemical activity related to filiform corrosion in organic coated steel by scanning vibrating electrode technique and scanning micropotentiometry

    Corrosion Science, Vol. 227

  2. Novel dynamic method based on CV-SECM and SWV-SECM for the in situ chemical imaging of reactive metal surfaces undergoing corrosion and corrosion inhibition illustrated with the case of copper corrosion inhibition by benzotriazole

    Electrochimica Acta, Vol. 474

  3. Sebacate intercalated Ca–Al layered double hydroxide pigments for corrosion protection of low carbon steel: Anion exchange and electrochemical properties

    Applied Clay Science, Vol. 250

2023

  1. Corrosion Performance of Ti6Al7Nb Alloy in Simulated Body Fluid for Implant Application Characterized Using Macro- and Microelectrochemical Techniques

    Coatings, Vol. 13, Núm. 6

  2. Evaluation of the Applicability of Voltammetric Modes in Scanning Electrochemical Microscopy for In Situ Corrosion Characterisation of Copper-Based Materials

    Metals, Vol. 13, Núm. 12

  3. In situ, real-time imaging of redox-active species on Al/Cu galvanic couple and corrosion inhibition with 2-mercaptobenzimidazole and octylphosphonic acid

    Corrosion Science, Vol. 217

  4. Inhibition of the localised corrosion of AA2024 in chloride solution by 2-mercaptobenzimidazole and octylphosphonic acid

    npj Materials Degradation, Vol. 7, Núm. 1

2022

  1. Contributions of Microelectrochemical Scanning Techniques for the Efficient Detection of Localized Corrosion Processes at the Cut Edges of Polymer-Coated Galvanized Steel

    Molecules, Vol. 27, Núm. 7

  2. Development of an Al3+ ion-selective microelectrode for the potentiometric microelectrochemical monitoring of corrosion sites on 2098−T351 aluminum alloy surfaces

    Electrochimica Acta, Vol. 415

  3. Do titanium biomaterials get immediately and entirely repassivated? A perspective

    npj Materials Degradation, Vol. 6, Núm. 1

  4. Durability of Reinforced Concrete with Additions of Natural Pozzolans of Volcanic Origin

    Materials, Vol. 15, Núm. 23

  5. Electrochemical characterization of alloy segregation in the near-surface deformed layer of welded zones of an Al−Cu−Li alloy using scanning electrochemical microscopy

    Electrochimica Acta, Vol. 427

  6. Investigating local corrosion processes of magnesium alloys with scanning probe electrochemical techniques: A review

    Journal of Magnesium and Alloys, Vol. 10, Núm. 11, pp. 2997-3030

  7. Surface finishing effects on the corrosion behavior and electrochemical activity of 2098-T351 aluminum alloy investigated using scanning microelectrochemical techniques

    Materials Characterization, Vol. 191

  8. Uses of Scanning Electrochemical Microscopy (SECM) for the Characterization with Spatial and Chemical Resolution of Thin Surface Layers and Coating Systems Applied on Metals: A Review

    Coatings, Vol. 12, Núm. 5

2021

  1. Evaluation of in vitro corrosion resistance and in vivo osseointegration properties of a FeMnSiCa alloy as potential degradable implant biomaterial

    Materials Science and Engineering C, Vol. 118

  2. Experimental characterization, machine learning analysis and computational modelling of the high effective inhibition of copper corrosion by 5‐(4‐pyridyl)‐1,3,4‐oxadiazole‐2‐thiol in saline environment

    Electrochimica Acta, Vol. 398

  3. In Situ Investigation of the Cytotoxic and Interfacial Characteristics of Titanium When Galvanically Coupled with Magnesium Using Scanning Electrochemical Microscopy

    ACS Applied Materials and Interfaces, Vol. 13, Núm. 36, pp. 43587-43596

  4. Investigation of anomalous hydrogen evolution from anodized magnesium using a polarization routine for scanning electrochemical microscopy

    Journal of Electroanalytical Chemistry, Vol. 895

  5. New insights on the influence of aluminum on the anomalous hydrogen evolution of anodized magnesium using scanning electrochemical microscopy

    Electrochimica Acta, Vol. 391