Publicaciones (74) Publicaciones de Javier Izquierdo Pérez

2024

  1. Contributions to a More Realistic Characterization of Corrosion Processes on Cut Edges of Coated Metals Using Scanning Microelectrochemical Techniques, Illustrated by the Case of ZnAlMg-Galvanized Steel with Different Coating Densities

    Materials, Vol. 17, Núm. 7

  2. In-situ measurement of electrochemical activity related to filiform corrosion in organic coated steel by scanning vibrating electrode technique and scanning micropotentiometry

    Corrosion Science, Vol. 227

  3. Novel dynamic method based on CV-SECM and SWV-SECM for the in situ chemical imaging of reactive metal surfaces undergoing corrosion and corrosion inhibition illustrated with the case of copper corrosion inhibition by benzotriazole

    Electrochimica Acta, Vol. 474

  4. Sebacate intercalated Ca–Al layered double hydroxide pigments for corrosion protection of low carbon steel: Anion exchange and electrochemical properties

    Applied Clay Science, Vol. 250

2023

  1. Corrosion Performance of Ti6Al7Nb Alloy in Simulated Body Fluid for Implant Application Characterized Using Macro- and Microelectrochemical Techniques

    Coatings, Vol. 13, Núm. 6

  2. Evaluation of the Applicability of Voltammetric Modes in Scanning Electrochemical Microscopy for In Situ Corrosion Characterisation of Copper-Based Materials

    Metals, Vol. 13, Núm. 12

  3. In situ, real-time imaging of redox-active species on Al/Cu galvanic couple and corrosion inhibition with 2-mercaptobenzimidazole and octylphosphonic acid

    Corrosion Science, Vol. 217

  4. Inhibition of the localised corrosion of AA2024 in chloride solution by 2-mercaptobenzimidazole and octylphosphonic acid

    npj Materials Degradation, Vol. 7, Núm. 1

2022

  1. Contributions of Microelectrochemical Scanning Techniques for the Efficient Detection of Localized Corrosion Processes at the Cut Edges of Polymer-Coated Galvanized Steel

    Molecules, Vol. 27, Núm. 7

  2. Development of an Al3+ ion-selective microelectrode for the potentiometric microelectrochemical monitoring of corrosion sites on 2098−T351 aluminum alloy surfaces

    Electrochimica Acta, Vol. 415

  3. Electrochemical characterization of alloy segregation in the near-surface deformed layer of welded zones of an Al−Cu−Li alloy using scanning electrochemical microscopy

    Electrochimica Acta, Vol. 427

  4. Surface finishing effects on the corrosion behavior and electrochemical activity of 2098-T351 aluminum alloy investigated using scanning microelectrochemical techniques

    Materials Characterization, Vol. 191

  5. Uses of Scanning Electrochemical Microscopy (SECM) for the Characterization with Spatial and Chemical Resolution of Thin Surface Layers and Coating Systems Applied on Metals: A Review

    Coatings, Vol. 12, Núm. 5

2021

  1. Evaluation of in vitro corrosion resistance and in vivo osseointegration properties of a FeMnSiCa alloy as potential degradable implant biomaterial

    Materials Science and Engineering C, Vol. 118

  2. Experimental characterization, machine learning analysis and computational modelling of the high effective inhibition of copper corrosion by 5‐(4‐pyridyl)‐1,3,4‐oxadiazole‐2‐thiol in saline environment

    Electrochimica Acta, Vol. 398

  3. On the local corrosion behavior of coupled welded zones of the 2098-T351 Al-Cu-Li alloy produced by Friction Stir Welding (FSW): An amperometric and potentiometric microelectrochemical investigation

    Electrochimica Acta, Vol. 373

  4. Use of alumina sludge arising from an electrocoagulation process as functional mesoporous microcapsules for active corrosion protection of aluminum

    Progress in Organic Coatings, Vol. 151

  5. Use of amperometric and potentiometric probes in scanning electrochemical microscopy for the spatially-resolved monitoring of severe localized corrosion sites on aluminum alloy 2098-t351

    Sensors (Switzerland), Vol. 21, Núm. 4, pp. 1-15

2020

  1. Implementación de técnicas electroquímicas para el estudio de la corrosión de materiales biorreabsorbibles desde la macro a la microescala

    Innovación Docente e Investigación en Ciencias, Ingeniería y Arquitectura. Avanzando en el proceso de enseñanza-aprendizaje (Dykinson), pp. 295-310

  2. Implementación de técnicas electroquímicas para el estudio de la corrosión de materiales biorreabsorbibles desde la macro a la microescala

    Actas del II Congreso Internacional de Innovación Docente e Investigación en Educación Superior: avanzando en las Áreas de Conocimiento: 11, 12 y 13 de noviembre de 2020