Didácticas Específicas
Departamento
Benjamín Jesús
González Díaz
Profesor Titular Universidad
Publicaciones en las que colabora con Benjamín Jesús González Díaz (21)
2023
2022
-
Characterization of a New Low Temperature Encapsulation Method with Ethylene-Vinyl Acetate under UV Irradiation for Perovskite Solar Cells
Applied Sciences, Vol. 12, Núm. 10, pp. 5228
-
Characterization of a New Low Temperature Encapsulation Method with Ethylene-Vinyl Acetate under UV Irradiation for Perovskite Solar Cells
Applied Sciences (Switzerland), Vol. 12, Núm. 10
-
Perovskite Solar Cells Prepared in Ambient Conditions based on an HTM-Free Architecture that has a Back Contact Deposited from a Paste made with Graphite, Black Carbon, Mai and PVDF Dispersed in Chlorobenzene
8th World Conference on Photovoltaic Energy Conversion
-
Study of the Evolution of the Performance Ratio of Photovoltaic Plants Operating in a Utility-Scale Installation Located at a Subtropical Climate Zone Using Mixed-Effects Linear Modeling
Applied Sciences (Switzerland), Vol. 12, Núm. 21
-
Testing EVA, PMMA and PVDF Encapsulated Perovskite Solar Cells in a Climatic Chamber by Following the International Summit on Organic Photovoltaic Stability (ISOS-T) Protocols
8th World Conference on Photovoltaic Energy Conversion
2021
-
Assessing the Use of Polyvinylidene Fluoride as a Binder Material for Producing Carbon Based Inks Suitable for HTM-Free Perovskite Solar Cells
38th European Photovoltaic Solar Energy Conference and Exhibition
-
Exploring the Use of Methylammonium Iodide to Improve the Uniformity of the MAPbI3 Layer in HTM-Free Perovskite Solar Cells Equipped with Back Contacts based on Pastes of Graphite and Black Carbon in a Polyvinylidene Fluoride in Toluene Solution
38th European Photovoltaic Solar Energy Conference and Exhibition
-
Testing Encapsulated Perovskite Solar Cells in a Climatic Chamber by Following the IEC 61215 and IEC 61646 Standards for the Thermal Cycling Test
38th European Photovoltaic Solar Energy Conference and Exhibition
2020
-
Developing an Agglomerate of Graphite and Black Carbon in an Ethylene-Vinyl Acetate in Toluene Solution for Producing Electrodes for HTM-Free Perovskite Solar Cells
37th European Photovoltaic Solar Energy Conference and Exhibition
-
Improvements on the Stability of MAPbI3 Thin Films Against UV Radiation by a Low Temperature Encapsulation Method that Uses Commercial Ethylene-Vinyl Acetate Sheets
37th European Photovoltaic Solar Energy Conference and Exhibition
-
Technical Analysis of Mixed Binders Based on Epoxy Resin and Ethylene-Vinyl Acetate to Produce Conductive Inks for the Metallization of Perovskite Solar Cells via Screen Printing Technique
37th European Photovoltaic Solar Energy Conference and Exhibition
2019
-
Fabrication of Smooth, Mirror-Like and PbI2-Free Thin Film Perovskite Layers in Ambient Conditions
36th European Photovoltaic Solar Energy Conference and Exhibition
2018
-
Exploring the Use of Collodion as a Binder in Screen Printing Vehicles for Perovskite Solar Cells Metallization
35th European Photovoltaic Solar Energy Conference and Exhibition
-
Highly luminescent film as enhancer of photovoltaic devices
Journal of Luminescence, Vol. 201, pp. 148-155
-
Modelling and control of a photovoltaic energy system with battery storage
6th International Workshop on Simulation for Energy, Sustainable Development and Environment, SESDE 2018
2017
-
Forensic analysis of Si-based PV module micro-cracking due to standard IEC thermal and mechanical testing procedures
2017 IEEE 44th Photovoltaic Specialist Conference, PVSC 2017
2016
-
Forensic analysis of Si-based PV module micro-cracking due to standard IEC thermal and mechanical testing procedures
Conference Record of the IEEE Photovoltaic Specialists Conference
2015
-
A new cost-effective polymeric film containing an Eu(III) complex acting as UV protector and down-converter for Si-based solar cells and modules
Solar Energy Materials and Solar Cells, Vol. 136, pp. 187-192
-
Luminescent polymeric film containing an Eu(III) complex acting as UV protector and down-converter for Si-based solar cells and modules
Surface and Coatings Technology, Vol. 271, pp. 106-111